15-9. AutoCAD Drawing SPLINE With the Mouse
How to draw a Curve using Mouse and the Spline command
What is a Spline?
This is a wavy line (curve) which is similar to selecting a Polyline by using this command, you can create a wavy or winding line that has more grips on it. With these grips, you can further shape the final appearance of lines.
Spline drawn line has only two end points connecting to the endpoint, while by contrast has more interception (which you see after selecting it). Use these clamps can subsequently move the line and create the path.
Note!: The more of these GRIPS make it better you can shape the trajectory line.
Spline drawn line has only two end points connecting to the endpoint, while by contrast has more interception (which you see after selecting it). Use these clamps can subsequently move the line and create the path.
Note!: The more of these GRIPS make it better you can shape the trajectory line.
Draw a Wavy Curve by the Spline Command
1st With the DRAW toolbar (or text menu Draw> Spline) Spline select button and click.
2nd On the desktop, drawing, click the first item that will be end point spline, then click on another point, then click on the third point, and so on to the end point. The more clicks between the start and end points to greater opportunity for post-processing lines.
3rd After a certain number of hits (dots) in the Command Line you see this note "Specify next point or [Close/Fit tolerance] <Start tangent>". If you write the letter C (c) for AutoCAD CLOSE subcommand will close the line with the initial point, if this is what you want then press Enter 2x.
Pay attention to the function button for ORTHO mode. If ORTHO is turned 'ON' and Spline and to make it a close with Close, apparently would seem that this is just one line. But when you grasp the clamp and move the part of the line you'll notice that the circle line closed . So when you draw off Ortho Spline lines.
2nd On the desktop, drawing, click the first item that will be end point spline, then click on another point, then click on the third point, and so on to the end point. The more clicks between the start and end points to greater opportunity for post-processing lines.
3rd After a certain number of hits (dots) in the Command Line you see this note "Specify next point or [Close/Fit tolerance] <Start tangent>". If you write the letter C (c) for AutoCAD CLOSE subcommand will close the line with the initial point, if this is what you want then press Enter 2x.
Pay attention to the function button for ORTHO mode. If ORTHO is turned 'ON' and Spline and to make it a close with Close, apparently would seem that this is just one line. But when you grasp the clamp and move the part of the line you'll notice that the circle line closed . So when you draw off Ortho Spline lines.
If you want to draw an "open" Spline line then click on the endpoint DTM (right mouse click) 4 times.
1. first DTM (right mouse click) click intends to close Spline => DTM click and select the option Enter
2. DTM second click returns you to your starting point => click DTM
3. DTM second click returns you to the end point => click DTM
4. fourth DTM click within the command and creates an open line of Spline. => click DTM
or just press ENTER 3 times.
1. first DTM (right mouse click) click intends to close Spline => DTM click and select the option Enter
2. DTM second click returns you to your starting point => click DTM
3. DTM second click returns you to the end point => click DTM
4. fourth DTM click within the command and creates an open line of Spline. => click DTM
or just press ENTER 3 times.
Comments
Post a Comment