21-3. AutoCAD MODELING BOX 3D Draw

How to Draw Cube in AutoCAD - 3D model?

Command entry Box in AutoCAD

BOX command on the MODELING toolbar is used to draw 3D models such as Cubes. (Example: when you draw a box with her side, combination Box and Shell commands)
Command can be run in command line prompt => BOX

Pay attention to the clause of this BOX command.
Also note that here we work with three dimensions (length, width and height)

Command: _box
Specify first corner or [Center]: * Cancel *
Command: * Cancel *
Command: _box
Specify first corner or [Center]:
Specify other corner or [Cube / Length]: C
Specify length <124.6657>: Enter

Command: _box
Specify first corner or [Center]:
Specify other corner or [Cube / Length]: L
Specify length <124.5392>: Enter
Specify width <117.9951>: Enter
Specify height or [2Point] <124.5392>:

Command: _box
Specify first corner or [Center]: C [note that this is the center of a cube or rectangular 3D model and therefore does not 2D figure.]
Specify center:
Specify corner or [Cube / Length]:
Specify height or [2Point] <124.5392>: Enter
Command: * Cancel *

Command: _box
Specify first corner or [Center]: C [note that this is the center of a cube or rectangular 3D model and therefore does not 2D figure.]
Specify center:
Specify corner or [Cube / Length]: L
Specify length <101.2323>: 100 + Enter
Specify width <87.0916>: 200 + Enter
Specify height or [2Point] <124.5392>: 100
BOX in AutoCAD

If you draw in the 3D view as: SE Isometric drawing when you can then see how it will look like your drawing (as you can in 3 mouse clicks) or via the command with the entry of dimensions.
Drawe Box with a Mouse

Comments

Post a Comment

Popular posts from this blog

15-13a. AutoCAD Export Coordinates Points to CSV

Image
How to Export Coordinates of Points Using LISP to AutoCAD Since this web tutorial is intended for beginners, here I will describe how to export Coordinates for specific points in the drawing. Take for example that the drawings have points that are set to specific coordinates (this is quite used in geodesy, but mostly  MAP CAD programs  and some already have built-in  LISP  Export programs). In the picture below, notice that I have created several points on the desktop. Note that with the cursor I have an extra cloud with the coordinate position if I click on the position where the cursor is currently located. (this cloud can be switched on/off at the  DYN  button (dynamic input) How to use LISP? To use this option ( export coordinates to CSV file ), a file that has the extension ' * .lsp ' is used. This so-called scripted code needs to be copied to the "some" folder. Usually this is the  AutoCAD folder  that contains other files with...
Read more

24d. Plot in Color Thickness Lines

Image
How to Plot in Color and Thickness of Lines on printed paper in AutoCAD. If you probably have a problem with the  Thickness Line  (not to say the width of the line because some use this expression) on the drawing or the  Color Line  on the drawing. If you are asking any of the following questions: Why are all the lines of the same thickness? How to change the thickness of the line on the drawing we print to the printer (plotting on the plotter)? AutoCAD does not print Color on the drawing? Why these questions? Well there is reason. Print black and white drawings are done over pre-prepared  CTB file  (also in color). To have the lines do not look like a toe, you need to experiment with the thickness of the line. If you want to print a drawing Floor plan of a building and you want to distinguish it from outer walls of interior, portions of drawings that display windows, doors and the like. Then you will set different line thicknesses in the...
Read more

24c. Ucsfollow Command Rotate Drawing

Image
Rotating Drawing MODEL in AutoCAD - Ucsfollow Command In the previous tutorial, I showed how to  Rotate the drawing within the Constituent/Component . Here is the possibility of Rotating the other way when Plotting Drawings. This method of Rotating images in Layout Model when plotting is often used in geodesy at plotting KCBR (particles) that copies of the cadastral plan, if the particles are bigger in size than A4 paper and can't fit into the framework of Model Layout. (eg, a plan was drawn at a scale of 1:2000 and we have plot on A4 paper, and " Plot scale " scale 1:1, in fact, we print it on paper dimensions are in scale 1:2000) That they would not plot on tracing paper A3 sometimes it is enough to rotate a drawing that plan and the rotation of the entire plan, a particle can be placed within the model. When rotating the drawing in  Layout Model/Paper  should bear in mind that the drawing in our real model does not rotate, no matter what we rotate conducted within ...
Read more