15-14. AutoCAD Command HATCH fillings - hatching

How to fill in with a command HATCH (hatching part drawings)

Command entry Hatch

Hatching parts art works using command Hatch (Fill). When we want to highlight some of the drawing will then use this command. For Hatching a part of drawing lines "Must be a closed area", If this is not the case, refer to the link How to Find Disconected Line and solve problem.

HATCH command to run the HATCH, click on the toolbar or Draw menu text = Draw> Hatch or the Command Line prompt type "HATCH"

We opened up a dialogue window where we choose the form of lines of hatching.

Hatch and Gradient in AutoCAD



Then click on the button "Add Pick Points" need to click in an area that we want to fill the hatching and press the Enter key to make us re-appeared dialog box. (if we can choose the Gradient).
Click OK and we have a drawing with hatching. (If there are a number of separate closed areas that we want to fill out then click on each of them during the election field.
Scale = 1
How to use HATCH command in AutoCAD -example 1

Scale = 1

How to use HATCH command in AutoCAD -example 2

Scale = 3.5
How to use HATCH command in AutoCAD -example 2

If you are not satisfied with the hatching and we want to change it, you can delete the respective (single click on the Fill left mouse button and press the button DELETE) or edit (double click on the hatching and re-election)

To change the width of the hatches between the elements (line) is needed in the area SCALE dialogue window, change the number 1 at some value (0.5 or 1.2) Watch here for a decimal number is not valid "Point" but the "Point".

Order MATCH PROPERTIES a properties of a hatching can be transferred to another hatching (which is somewhat similar to the Format Painter to transfer the formatting in Excel).
1. Activate command MATCH Properties from the menu Modify text => Match Properties
2. Click on the original hatching
3. Click on the destination of hatching

In how many have problems with developing REGION and HATCH command line that you are not connected somewhere (so you do not have a closed area, see tutorial Find Disconetced Point)

Comments

Post a Comment

Popular posts from this blog

15-13a. AutoCAD Export Coordinates Points to CSV

Image
How to Export Coordinates of Points Using LISP to AutoCAD Since this web tutorial is intended for beginners, here I will describe how to export Coordinates for specific points in the drawing. Take for example that the drawings have points that are set to specific coordinates (this is quite used in geodesy, but mostly  MAP CAD programs  and some already have built-in  LISP  Export programs). In the picture below, notice that I have created several points on the desktop. Note that with the cursor I have an extra cloud with the coordinate position if I click on the position where the cursor is currently located. (this cloud can be switched on/off at the  DYN  button (dynamic input) How to use LISP? To use this option ( export coordinates to CSV file ), a file that has the extension ' * .lsp ' is used. This so-called scripted code needs to be copied to the "some" folder. Usually this is the  AutoCAD folder  that contains other files with...
Read more

24d. Plot in Color Thickness Lines

Image
How to Plot in Color and Thickness of Lines on printed paper in AutoCAD. If you probably have a problem with the  Thickness Line  (not to say the width of the line because some use this expression) on the drawing or the  Color Line  on the drawing. If you are asking any of the following questions: Why are all the lines of the same thickness? How to change the thickness of the line on the drawing we print to the printer (plotting on the plotter)? AutoCAD does not print Color on the drawing? Why these questions? Well there is reason. Print black and white drawings are done over pre-prepared  CTB file  (also in color). To have the lines do not look like a toe, you need to experiment with the thickness of the line. If you want to print a drawing Floor plan of a building and you want to distinguish it from outer walls of interior, portions of drawings that display windows, doors and the like. Then you will set different line thicknesses in the...
Read more

24c. Ucsfollow Command Rotate Drawing

Image
Rotating Drawing MODEL in AutoCAD - Ucsfollow Command In the previous tutorial, I showed how to  Rotate the drawing within the Constituent/Component . Here is the possibility of Rotating the other way when Plotting Drawings. This method of Rotating images in Layout Model when plotting is often used in geodesy at plotting KCBR (particles) that copies of the cadastral plan, if the particles are bigger in size than A4 paper and can't fit into the framework of Model Layout. (eg, a plan was drawn at a scale of 1:2000 and we have plot on A4 paper, and " Plot scale " scale 1:1, in fact, we print it on paper dimensions are in scale 1:2000) That they would not plot on tracing paper A3 sometimes it is enough to rotate a drawing that plan and the rotation of the entire plan, a particle can be placed within the model. When rotating the drawing in  Layout Model/Paper  should bear in mind that the drawing in our real model does not rotate, no matter what we rotate conducted within ...
Read more