15-12. AutoCAD INSERT a BLOCK in AutoCAD

How to insert a Block in drawing with a command INSERT BLOCK (inserting a block in drawing)


Insert Block in AutoCAD draw

What is INSERT BLOCK in AutoCAD?

It was created to insert a block (either from a separate file or a block already created on your desktop, where it is located and the main drawing). I always create a block in a separate file command WBLOCK so can any drawings to insert some of the blocks.

How to insert Block drawing?

EXAMPLE 1 (a block up on the desktop next to the main drawing).

Block and Draw in AutoCAD
Click on the Insert Block button on the toolbar or from the INSERT toolbar, Insert => Block or Command Line command prompt INSERT

The first step you have two options.
Insert a block from the desktop, which is where the main drawing, or using the Browse button to search your HDD and find the file containing the block.
Insert Block in AutoCAD

Insert Block from a separate file using the Browse button.
Insert Block in AutoCAD

When you click the OK button should be placed on a block where you want. (Note that I have endpoint meaning that I included the function button OSNAP mode) so you can tie block the door with a drawing.
This is very important because without OSNAP not exactly hit the top end of that line the wall.

After the first click of binding to a specific point, press ENTER to complete the action. (or double-click the left mouse)
Paste Block on object Draw in AutoCAD

Notice that the dialog box you can rotate the block for a certain number of degrees ANGLE (that makes it easy to place the block on the drawing), although later you can use commands Mirror, Move, Rotate from the toolbar MODIFY adjust the position of your choice.

Now our drawing looks like.
Finished drawing in AutoCAD

Comments

Post a Comment

Popular posts from this blog

15-13a. AutoCAD Export Coordinates Points to CSV

Image
How to Export Coordinates of Points Using LISP to AutoCAD Since this web tutorial is intended for beginners, here I will describe how to export Coordinates for specific points in the drawing. Take for example that the drawings have points that are set to specific coordinates (this is quite used in geodesy, but mostly  MAP CAD programs  and some already have built-in  LISP  Export programs). In the picture below, notice that I have created several points on the desktop. Note that with the cursor I have an extra cloud with the coordinate position if I click on the position where the cursor is currently located. (this cloud can be switched on/off at the  DYN  button (dynamic input) How to use LISP? To use this option ( export coordinates to CSV file ), a file that has the extension ' * .lsp ' is used. This so-called scripted code needs to be copied to the "some" folder. Usually this is the  AutoCAD folder  that contains other files with...
Read more

24d. Plot in Color Thickness Lines

Image
How to Plot in Color and Thickness of Lines on printed paper in AutoCAD. If you probably have a problem with the  Thickness Line  (not to say the width of the line because some use this expression) on the drawing or the  Color Line  on the drawing. If you are asking any of the following questions: Why are all the lines of the same thickness? How to change the thickness of the line on the drawing we print to the printer (plotting on the plotter)? AutoCAD does not print Color on the drawing? Why these questions? Well there is reason. Print black and white drawings are done over pre-prepared  CTB file  (also in color). To have the lines do not look like a toe, you need to experiment with the thickness of the line. If you want to print a drawing Floor plan of a building and you want to distinguish it from outer walls of interior, portions of drawings that display windows, doors and the like. Then you will set different line thicknesses in the...
Read more

24c. Ucsfollow Command Rotate Drawing

Image
Rotating Drawing MODEL in AutoCAD - Ucsfollow Command In the previous tutorial, I showed how to  Rotate the drawing within the Constituent/Component . Here is the possibility of Rotating the other way when Plotting Drawings. This method of Rotating images in Layout Model when plotting is often used in geodesy at plotting KCBR (particles) that copies of the cadastral plan, if the particles are bigger in size than A4 paper and can't fit into the framework of Model Layout. (eg, a plan was drawn at a scale of 1:2000 and we have plot on A4 paper, and " Plot scale " scale 1:1, in fact, we print it on paper dimensions are in scale 1:2000) That they would not plot on tracing paper A3 sometimes it is enough to rotate a drawing that plan and the rotation of the entire plan, a particle can be placed within the model. When rotating the drawing in  Layout Model/Paper  should bear in mind that the drawing in our real model does not rotate, no matter what we rotate conducted within ...
Read more